Know The New EOTech EXPS2-0

The new EOTech EXPS2-0 has the protection of Pelican- esque plastic clamshell. The ones who have their stint with the EOTech products will certainly not be surprised by it. No damage in shipping hence. The traverse-mounted CR123 replaces the AA batteries. A single CR123 works 600 hours at the default brightness. Auto off settings are required for conserving the battery. Another great feature of EOTech EXPS2-0 and some other EOTech EXPS variants is the variable brightness. There are20 settings available and the setting number 12 is the one where the user can find the default brightness. It is a good thing that can even be used in a desert on a day when there are no clouds.

The changes made
The issues that the users have been complaining of on using the previous models have also been considered. The latch and standard battery cap of the 500 series have been replaced with one O-ring seal cap. This O-ring seal cap is tethered to the sight’s body. There is a better sealing that means there would be no lost parts. As mentioned earlier there is an option of running it by making use of a traverse mounted it will take not more than 2 3/4 inches of rail space. So there is more room for you to use as per your desire. You can place the EOTech EXPS2-0anywhere on the rail an yet have a good sight picture. Sight adjustments can be made at 1/2MOA clicks by making use of a pocket change or a used cartridge. One does not require any tools to dismount, mount and adjust the weapon. One will love this feature in case one forgets to take his tool bag along with him.

The specifications of EOTech EXPS2-0
The weight of the EOTech EXPS2-0 holographic weapon sight is 11.2 oz. It has a length o3.5 inches that means it would take 2.75 inches of rail space for mounting. It has 1x magnification. The optical type is parallax-free transmission holography. The eye relief is unlimited. It has +/-40 MOA adjustment range and adjustment per click is 1/2 MOA (1/2″@100 yards). It is submersible to ten feet and its operating temperature is -40-150 degrees F. It uses CR123 Lithium battery. The EOTech EXPS2-0 is priced at $559. A the front it has a 1/8 inch solid glass and at the rear it has a shatter resistant laminate of 3/15 inch. Fog proof sealing and anti glare coating help in giving a clear picture.

Insights of Magpul MBUS

Failure endorsement iron sights for firearms and ARs with a parallel flattop rail of Magpul MBUS are a familiar sight on numerous tactical and tactical guns and the complaints about them is very rare either in the functionality department.

Pairs of MBUS rears and MBUS sights matched with the F-height. The front sights are predominantly admired because of their low price, due to their construction of polymer.

Moreover they have a few limitations because they are the polymer sights, together with the fact of not getting installed on blocked, railed gases and very clearly some consumers will not get stable for anything less than metal.

How it raised:
It has been introduced earlier; the individuals who love Magpulexcluding their plastic backing iron sights, the MBUS pros are only the ticket for them. From the time when the announcement of the 40 round Gen M3 Pmag, they are few of majority of highly anticipated Magpul products.

At the NRA annual conference we spent a quality time with them and were satisfactorily amazed. According to weapon evolution they are heading to the dealers now and sooner must be in the provision, which is on the right schedule with what Magpul MBUS has told.

When folded all these are rigid steel sights through a remarkably slight profile. Probably they will smash a month earlier than they smash themselves.
Both the sights are very quick adjusting, with tool-free height knob on wind age and the front sight and the rear is knobbed by the height.

One of the features that has gone from the MBUS pros that by clicking, it turns over the sights, are springs, even then they acquire a smooth action that trashes them vertically or folded with tough although not impracticable detents.
And by whom all these will be used for real pros, to accommodate the top rail mounted accessories and IR lasers leaning front side was made.

Resulting approach:
They have resigned from the MBUS polymer not in two together but the reproachful way. These conduct the price superiority to innumerable supplements high end endorsement iron sights, with the front running $85 and the rear running $105. The price for the rear and the front are the recommended prices whereas thoroughfare prices are likely to be remarkably very low.
Even then, same as the polymers MBUS have become predominant accessories in the world of AR, we are categorical that the Magpul MBUS pros will.

Aimpoint P.R.O., the optical system with unbeatable quality

Aimpoint has manufactured quality optics for the past 35 years. Aimpoint PRO or the Patrol Rifle Optic is the best option for you to purchase a quality optical system without having to spend too much. It is a bargain at $400 online to get an optic system that is so durable, rugged and simple by a reputable company like Aimpoint which has put a lot of effort into building this optic.

Lesser features with uncompromised quality
The Aimpoint PRO gives you the option to scale down some features when required without entirely taking them away. The Patrol Rifle Optic developed generally for use in Law Enforcement has forty levels of brightness in both red dot and Night vision. They have now switched to standard aluminium housing from the previous extruded aluminium and have also changed the battery compartment. It has half an inch of Minutes of Angle (MOA) at 100 yards as opposed to one fourth of an inch. This is how they have brought down the costs; they just fine tuned some features which are unnoticeable and have left the quality uncompromised.

Aimpoint uses the same Advanced Circuit Efficiency Technology they have used in every reflex sight they have made till date. What they have cut down on is expensive manufacturing methods. They cut down 5 mm on the glass and use a different mounting method. They switched to a smaller and lighter battery that lasts 30,000 hours as opposed to 50,000 or 80,000 hours. The battery is a little difficult to find in the market and the fewer brightness option leaves the high settings a little too high as the range is limited. The gears and adjustment dial is more exact which have greatly shrunk the price.

What is commendable is that they have not compromised on the quality so as to single-handedly lose the name they have fought to build for themselves over the years.

The unbeatable quality
This Aimpoint PRO is perfect for those who want quality at a lower price. For those who are very particular to the range it offers in its different settings options should go for another pricey product that Aimpoint has to offer.
The reliability and simplicity of the product make up for its price for sure. The features are enough for the price you pay. The quality is unbeatable and will be a great factor in not changing your mind about this product. To be precise, its simply value for money.

US Man Charged Over Internet Gun Sales to Australians

US Man Charged Over Internet Gun Sales to Australians
A Kentucky man accused of selling an assault rifle and a 9mm pistol to buyers in Australia via an encrypted “deep web” website has been indicted by a grand jury in the US. Adam Joseph Bunger, 33, will be arraigned on October 30 in the District Court in Bowling Green, Kentucky, after the jury was presented with evidence collected by Australian Federal Police and US authorities. Bunger is accused of using the German-based website Black Market Reloaded to find buyers in… [Australian (Sydney) / AAP, via]

How to Mount a Rifle Scope?

Scopes are the magnifying devices mounted on top of the rifle for better accuracy of shooting. People find it difficult mounting rifle scopes, but a few simple steps can make it pretty easy.

  • Selecting the right scope: It is very important to select the right scope for your rifle. A rifle can attain a particular distance and the scope should not magnify beyond that distance. You will not be able to calculate the distance correctly. It is always better to go through the technical manual given with the rifle.
  • Mounting equipment is important: Rifle scopes are supplied with suitable mounting equipment. It consists of rings and base plates. They are according to the specifications of the rifle e.g. scope tube diameter and front objective. It can’t be interchanged with other models.

The mounting process

As the first step, you must ensure the safety. Make sure that the rifle is not loaded. Keep the fingers away from the trigger. Place the gun in a gun vice while you fix the scope on it. In case vice is not available, then use sand bags to place it safely.

  • You are required to remove the plug screws before placing the base. Clean the area using good quality degreaser and apply rust inhibitor. This would keep the screws rust free and you will be able to open them easily next time.
  • Place the base plate following the instructions from the instruction manual. It is important to read the instructions carefully as the instructions vary with the models. Check that the mount is placed correctly before tightening it completely. Some people prefer applying thread locking compound to prevent unscrewing it in the future.
  • Attach the rear and front scope rings according to the instructions. Alignment bars are given along with a few models. Place the rings on the alignment bars and move until they reach to the middle point. Align the points on the bars horizontally and vertically. In the models where alignment bar is not supplied, windage screw is used.
  • Tighten the screws properly with the base plate after reading the torque specification.
  • Remove the ring caps and place them together without changing the order, otherwise it will change the precision. Fix the scope in the rings. Make sure that the elevation turret is upwards and the windage turret is at the right hand side of the gun.
  • Use the level to correct the alignment of the scope. Check the level from the front, top and left side. Ensure that the crosshairs are leveled precisely.
  • Check the view through the eye piece. Determine the field of vision. Full field of view should be visible to you without moving the head. Check the scope and slide it back and forth until you establish correct field of vision.
  • Tighten the scope rings by fastening all the screws in a round-robin manner. Fastening a single screw completely may damage the riflescopes.

Mounting rifle scopes requires concentration and dedicated efforts. Correctly mounted riflescopes give fabulous accuracy!

Magpul PRS stocks review

The perfect adjustable butt stock for any AR rifle. Long range shooting requires perfect precision and for those who find precision difficult, this add on will aid the shooter with perfect sighting, support and most of all comfort.

The PRS can shorten or lengthen the length of pull as well as height to adjust alignment of site.
This well designed and aesthetically pleasing product is near indestructible with alloy steel adjustment shafts and aluminum finishes. It will fit any AR/M-4 rifle for perfect functionality. It is designed go through any unexpected or unpredictable conditions that highly increases its tolerance quotient.

Magpul has designed this product so that installation is quick, easy and clean. Installation is done in a few easy steps.

  1. Remove old stock.
  2. Loosen screws on the Magpul.
  3. Slide it over the existing buffer housing.
  4. Pop off the rubber recoil pad and put the screw back into the buffer housing. If you would like to fix up the carbine you will require a rifle, rifle buffer, receiver extension tube and spring which is not included in purchase, although a DPMS kit is available for purchase.

This product has such great usability as all adjustments are made by rotating the aluminum knobs, easy and hassle free. The steel adjustment shafts of the PRS are strong and stay where you put them without any slippage, although they are relatively easy to reset for another shooter.

This product comes with optional extra accessories, a comfortable rubber butt-pad to prevent any slippage while aiming and shooting as well as giving that extra protection to your shoulder. There are also front and rear aluminum Sling loops which will give you the same stability as the butt-pad, so either preference will give you the comfort and accuracy you are looking for.

The Magpul PRS is a precise piece of machinery for any AR style firearm and a necessary addition to any gun owner. Don’t be taken in by any cheaper ‘knock offs’, the PRS is a strong, unique, slim lined, virtually indestructible product that no other product come close to measuring up to.

Specifications for the Magpul PRS:
The weight of this speculated rifle is approximately 1.68 lb and the weight, w/rifle receiver extension is taken to be 1.90 lb. Its overall Length, Max is 10.45-11.45″. And the LOP Adjustment: ~39 Clicks (0.026″/click) with the given LOP Adjustment Range: 1.00″. LOP, Min is accounted as ~13.3″ and the LOP, Max: ~14.3″
Finally the cheek Height Adjustment encounters ~29 Clicks (0.026″/click) whereas the cheek Height Adjustment Range confines up to 0.75″

Magpul stocks is a fresh pool in the market but has many commendable features to talk about like is functional or operational accessories that includes a butt pad and even the adjustment technique which can well understood form its well versed manual. But the one thing that should be thrown light upon is Magpul PRS is a serious tool that anyone will start to adore for its very first glance but its great utility is something that makes it even better.

The Magpul PRSĀ  can be found at Mounting Solutions Plus

Magpul UBR Stock review

I had the gratification of installing the M$ technique buttock before, so it is simple. The guidebook of Magpul is amazingly short and easy to understand. There is no clatter, vibrate or looseness. Everything goes mutually without any argument or drama. All the parts move in wonderful concord.

This beauty truly works perfectly to blow your minds up. It has been ventured as a stock that has broken all records because of its high demand and huge adaptability. Some of its appreciated specifications includes LOP collapsed adjustment that is fixed up in the 7th position which is 0.56inch part per position, the weight is also a little unmanageable, being 1.46 lb this rifle becomes very hard to handle, then is its length stock which is approximately 8 to 11.36 inch so that you have to struggle a bit while handling this black beast.

The best and the valued part of this stock it its price that is $ 265 which is quite cheap and reasonable when compared with any other rifle endured with these specifications. Therefore, it can rightfully be said as a Battle Rifle that knows its job which is to provide the gunner with quality shots always. The style and charisma of this rifle is well put forward by its black look and strong rock solid body.

This is the ultimate tool kit that can provide an enthralled experience which is well enunciated by its aluminum strike plates. It must be recorded that a good amount of effort can be seen in its making once you start using it up. As, without going through the provided manual one can understand nothing about Magpul stocks where as only one thing can be entitled from its first glance that is it is a pretty hefty rifle. The commendable part of this rifle is the stationary shooting that is worth a mention because this part can be taken as the pride of this product. But when it comes to the professional shooters the Magpul won’t last as the first choice for them but creeds good place in the minds of the novice shooter who can start their shooting journey with the help of an exceptional Battle Rifle.

The Magpul UBR utility is astonishing. As you can see in the form its inspiring pictures, it can seize a good amount of small things like battery, some extra bullets or many other small gadgets. It is very useful ability of this product. Moreover you can also attach an aluminum strike plate in any time you want. When you take it in weight category, the cons still remains that the product is extremely heavy. Once you attached, AR went to 7.5 lbs. to 8.5 lbs, it takes 1 lbs difference with just Magpul UBR installed. The only fault in this gun is its weight. One has to make good muscles to look wonderful with this gun. If you want a light weight gun, so just go to Magpul stocks and grab it.